|
|
 |
| |
|
|
|
|
|
| |
 |
|
Howard Industries’ junction
enclosures are designed to provide a
rugged, tamper-resistant housing for
multipoint medium-voltage junction
modules used in connection, looping,
or tapping applications.
Junction
enclosures are available for both
single-phase and three-phase
systems. |
|
 |
 |
| |
| Ratings |
Not Applicable
|
| |
| Standard Features |
• Mild steel all-welded construction
• Electrostatically applied polyester powder primer with
polyurethane topcoat; enclosure color is
Munsell 7GY3.29/1.5 green; junction mounting plate color is
Munsel 5BG7.0/0.4 gray
• Stainless steel handle, padlock
provision, recess cup, hinge pins
and barrels
• Silicon bronze pentahead security
bolt
• Rounded edges for safety
• Lifting provisions
• Grounding provisions
• Junction mounting plate with
provisions for mounting junction
modules
• Cabinet sizes available for single-phase and three-phase
applications, accommodating optional 2-, 3-, 4-, 5-, or 6-point
junctions rated 15, 25, or 35 kV, at 200 or 600 Amps.
• Cabinet meets requirements of ANSI C57.12.28 (American
National Standard, Pad-Mounted Equipment--Enclosure Integrity)
• RUS accepted designs
|
| |
| Optional Features |
• Stainless steel all-welded construction meeting requirements
of ANSI C57.12.29 (American National Standard, Pad-Mounted
Equipment--Enclosure Integrity for Coastal Environments)
• Fault indicator provisions
• Hold down cleats
• 2-, 3-, 4-, 5-, or 6-point junctions rated 15, 25, or 35 kV,
at 200 or 600 Amps.
|
| |
|
|
| |
 |
|
|
